Xerox 7232 Manuel d'utilisateur télécharger pdf (Page 217)

Xerox WorkCentre 7232/7242 System Administration Guide 207

18 Appendix

Configuring Network Authentication (by a remote Accounting

server)

Network authentication uses the user information managed on a remote Accounting

server to manage authentication (access) to available machine services.

Enable Network Authentication

To enable Network Authentication for use with this Device, at your networked

workstation, perform the following steps:

1. Open your Web browser and enter the TCP/IP address of the machine in the

Address or Location field. Press Enter.

2. Click the Properties tab.

3. Select the Security folder, then the Authentication Configuration hot link.

4. Select Login to Remote Accounts from the Login Type drop-down list, then

Network Accounting from the Accounting Mode drop-down list.

5. Place a checkmark in the Enable box for each service that you wish to restrict

access to. For explanations of each service, click the Help button.

6. Do not place a checkmark in the Non-account Print box if you wish to enable

people without accounts to continue to print.

7. From the Verify User Details drop-down menu, select either Yes or No (keep

logon records). The Yes selection will verify user information. When No (keep

logon records) is selected, User ID and Account ID must be entered at the Device,

but user information will not be checked. A logon record will be kept by the

Device, however.

8. If a Guest User box is available and configurable, consider whether it is advisable

in your network environment to allow simple password, guest access to this

restricted service device. The default setting is Off.

9. If you wish to allow guest access, enter your guest password twice in the boxes

provided.

10. Click Apply and enter the Administrator User name and password when

prompted.

11. Click the Reboot Machine button, then OK, when prompted.

12. Refresh your web browser, then click on the User Details Setup link to set the

Store User Details setting. Note that you can set either NVM or hard disk as the

1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 235 236

Pas de commentaire

Xerox 7232 Manuel d'utilisateur Page 217