Xerox 7232 Manuel d'utilisateur télécharger pdf (Page 91)

UNIX TCP/IP Installation

Xerox WorkCentre 7232/7242 System Administration Guide 81

SunOS

Follow the steps below to set up a SunOS workstation to communicate with the

machine.

1. Log in at a client workstation as root and add the machine to the /etc/hosts file.

For example:

IP address [tab] PrinterName

NOTE: If an NIS server is running on the same segment of the network as the

machine, log in at the NIS server as root and add the machine to the master hosts file.

For example:

IP address [tab] PrinterName

2. Verify connectivity to the machine, by using a UNIX command such as ping, as

shown in the following example:

ping PrinterName

PrinterName is alive

3. Edit the /etc/printcap file to contain an entry for the machine queue using the

following example:

PrinterName:\

:lp=:\

:rm=PrinterName:\

:mx#0:\

:sd=/var/spool/lpd/PrinterName:\

:lf=/var/spool/lpd/PrinterName/log:

1) PrinterName is the local client name of the machine.

2) lp= is the local device name for the printer output. For remote printers, this

parameter must be set to nothing.

NOTE: The recommended remote queue name is lp. That queue name will work with

the machine.

3) rm= is the remote device. This is the IP hostname for the machine in the local

client. The remote printer name defaults to lp, the default printer.

4) mx#0 is the indicator that there is no limit on the document size.

5) sd= is the path of the queue for the machine.

6) lf= is the error log file name.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 235 236

Pas de commentaire

Xerox 7232 Manuel d'utilisateur Page 91