Xerox 7232 Manuel d'utilisateur Page 136

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 236
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 135
12 E-mail
126 Xerox WorkCentre 7232/7242 System Administration Guide
Machine Name
Host Name – This is the SMB Host Name of the device
Domain Name – This is the DNS information. It has to be set via CentreWare
Internet Services when e-mail server names are used (host names are used
instead of IP addresses) AND the DNS IP address is left blank.
[Outgoing/Incoming E-mail Settings] > [POP3 Server Settings]: when receiving
E-mail via POP3
POP3 Server Name/Address – If server name is used, then DNS needs to be
configured properly via CentreWare Internet Services.
POP3 Server Port Number
POP3 Server Check Interval
POP3 Server Login name – POP3 login name used for SMTP Authentication.
POP3 Server Password – POP3 password used for SMTP Authentication.
POP3 Password Encryption
[Outgoing/Incoming E-mail Settings] > [SMTP Server Settings]: when sending
or receiving E-mail via SMTP
SMTP Server Name/Address – If server name is used then DNS needs to
configured properly via CentreWare Internet Services.
SMTP Server Port Number
E-mail Send Authentication
SMTP AUTH Login Name – SMTP login name used for SMTP
Authentication.
SMTP AUTH Password – SMTP password used for SMTP Authentication.
[Outgoing/Incoming E-mail Settings] > [Domain Filtering]: if required
Domain Filtering – This field will be populated ONLY if restriction is required
on sending mail to certain domains.
Domain 1 to 50
[Other Settings]
E-mail Receive Protocol
Output Destination for E-mail
4. Select [Save]
Test Mail
To make sure that E-mail has been set up successfully, perform the following steps:
Scan to E-mail
1. Load a document.
2. Select [E-mail] on the Menu screen.
Vue de la page 135
1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 235 236

Commentaires sur ces manuels

Pas de commentaire