Xerox Wide Format IJP 2000 Manuel d'utilisateur télécharger pdf (Page 68)

Xerox® CentreWare® Internet Services

Xerox® Wide Format IJP 2000

User Guide

2-8

Machine Settings

The following describes how to configure the settings at the machine user interface.

Note

CentreWare Internet Services can also be used to make these settings. For details, refer to the Help

section which can be displayed by clicking Help in the upper right of the CentreWare Internet

Services screen.

1. On the System Administrator Menu screen, press System Settings > Network Settings.

Note

For information on how to display the System Administrator Menu screen, refer to System

Administrator Menu Settings Overview on page 5-2.

2. Check that LPD is set to Enabled for Port Settings.

For information on the LPD port setting, refer to Port Settings on page 5-17.

3. Press Close to return to the Network Settings screen.

Note

When the machine is already assigned an IP address, go to step 7.

4. Press Protocol Settings > IPv4 - IP Address.

5. Specify the IP address using the numeric keypad.

6. Press Save.

7. Press Close several times until the System Administrator Menu screen displays.

8. Press Close.

Note

When a message prompting you to reboot the machine appears, follow the message to reboot the

machine.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 145 146

Pas de commentaire

Xerox Wide Format IJP 2000 Manuel d'utilisateur Page 68