Xerox Wide Format IJP 2000 Manuel d'utilisateur Page 29

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 146
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 28
Before Using the Machine
Xerox® Wide Format IJP 2000
User Guide
1-5
Power Source
Switching the Power On
The machine warms up and becomes ready to print within about 10 minutes after being powered on.
The Energy Saver feature allows you to reduce the power consumption of the machine, saving
electricity.
CAUTION: Do not turn off the power immediately after turning the power switch on. If you turn
the power off before the "Ready" message appears on the touch screen, the system could be
damaged.
Note
The machine consumes 11W or less even when the power switch is turned off. To avoid consuming
(or save) this standby power, turn the power breaker OFF. For information on how to do this, refer
to Saving Power Consumption While the Machine is not in Use on page 1-6.
For information on the Energy Saver feature, refer to Energy Saver Mode on page 1-7.
1. Press the power switch to the | position to switch the power on.
Note
The "Please wait..." message indicates that the machine is warming up. The machine cannot be
used while it is warming up.
Switching the Power Off
Switch the power off at the end of a day or if the machine is not used for a long time.
1. Press the power switch to the position to switch the power off.
Notes
Do not switch the power off in the following conditions. Otherwise, the data being processed
may be erased.
Data is being received (the Transmitting indicator on the control panel is blinking)
Printing is being processed
After paper is completely output, wait for five seconds or more before switching the power
off.
Vue de la page 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 145 146

Commentaires sur ces manuels

Pas de commentaire