Xerox DocuTech 128 HighLight Color Guide d'installation télécharger pdf (Page 71)

DocuTech 128/155/180 HighLight Color Installation Planning Guide 5-3

Installation

Software licensing

When your printer is purchased, one or more licenses are required

to use the operating system software and feature set. The host ID

is required to obtain the licenses. Your Xerox service

representative obtains and installs the licenses for you. Until the

licenses are entered, while you can power on and boot the

system, the printer remains in Disabled mode and cannot print.

Ongoing maintenance

After the installation of your Xerox DocuTech, there are a few

ongoing tasks that must be performed. These tasks may include

the following:

• Maintaining an adequate inventory of consumable supplies

• Overseeing routine maintenance and meter reporting

• Performing routine maintenance tasks such as replacing dry

ink or adding fuser lubricant to the printer

• Cleaning the exterior surfaces of the system

• Arranging for additional operator training

• Ordering additional fonts

• Ordering additional documentation

• Placing service calls for hardware problems

• Obtaining assistance in solving software-related problems

As installation coordinator, it is your responsibility to designate the

staff members and how many operators will be responsible for

performing these tasks. Most maintenance tasks are covered in

the initial operator training provided shortly after installation.

NOTE: For more information about routine maintenance tasks,

refer to the Maintenance chapter of this guide.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 85 86

Pas de commentaire

Xerox DocuTech 128 HighLight Color Guide d'installation Page 71