Xerox 1xx Manuel d'utilisateur

TIPS Including Software 8.0.27.xx Release Notes 701P46836 Hints and Xerox Nuvera® EA Digital Production System Hints and Tips Vers

Negative impacts on throughput There are several things that affect the performance of the system and RIP speed when processing print jobs. The foll

Tab behaviors for Non-MFF systems only On Non-MFF systems, tab jobs are delivered to the finisher face down in 1 to N order. As such, the following

Fault 10-2725 A 10-2725 fault (indicating that the fuser stripper fingers failed to home) may occur after a system restart. Clearing the fault sho

User Interface Hints & Tips Subtopic CQ# Description and Recommended Actions Annotation 30531 When forwarding jobs that contain Imposition /

Remote Services (Now a licensed feature) Subtopic CQ# Description and Recommended Action Capture / Transfer 37366 Canceling job data push (Captu

Importing DocuPrint IPS 7.x Input Groups and 8.x Virtual Printer Media Lists cannot be imported into DocuSP IPDS. DocuSP IPDS Job Setups must be re

Sample Current Job not supported Sample current job is not supported for IPDS jobs. The IPDS host presumes full control over the job’s output, and t

Networking (Connectivity) Hints & Tips AppleTalk Subtopic Description and Recommended Action AppleTalk printer name is queue name The AppleTalk

HTTP (Web Services) Subtopic CQ# Description and Recommended Action Internal Server Error You may get an "Internal Server Error" when a

WINS Subtopic Description and Recommended Action Broadcast mode Enabling WINS and without specifying a Primary WINS server will cause the device to

Prepared by: Xerox Corporation Global Knowledge & Language Services Webster, New York Microsoft® is a registered trademark of Microsoft C

Operating Feature Hints & Tips Printer Hints & Tips Stock Subtopic CQ# Description and Recommended Action Jam in feeder area 2 message 301

Staple print with two stock sizes 20726 If you want to staple print a job that requires two sizes of SEF stocks, and one of them is also loaded LEF,

Background Forms Subtopic CQ# Description and Recommended Action Image Shift 28889 When using the Image Shift option with a job that also uses a

Program a tab job using 2-sided originals for tab images To program a tab job using 2-sided originals with images for the tabs, program as special p

Change the default Save directory 19367 To change the default save directory in DocuSP: 1. Open System Preferences. 2. Select the Save tab. 3. Ent

is recommended as it will always work, assuming the default router and other network settings are correct, even without a name service running. EXAMP

Scan jobs – do not set Print with override 15988 Scan jobs can only be directed to the default queue. Do not set the disposition to "Print"

Fault caused by modified attribute 37250 If you hold or proof a copy job and modify an attribute that will cause it to fault (ex. request an unsuppo

Maximum stapled set thickness Maximum-stapled set thickness is 100 sheets or equivalent (see table below). The operator must limit the number of s

12-2505 Faults Subtopic CQ# Description and Recommended Action Auto unload You may experience unloads before reaching stack limits. Curl in the

Table of Contents Introduction...

Jamming with lightweight papers Lightweight papers can cause degraded performance (jam rate to stacking performance). Hint...Check for excessive pa

Security Subtopic CQ# Description and Recommended Action Account names Under Users and Groups, the system displays the built-in accounts using fr

Stock Selection Subtopic CQ# Description and Recommended Action Imposition in print driver 10747 The Imposition features in the print drivers off

Other Subtopic CQ# Description and Recommended Action Booklet Layout 28048 You will not be able to use Booklet Layout with an Encrypted or Passwo

Print Submission Tools Hints & Tips FreeFlow Print Manager / IPP Subtopic CQ# Description and Recommended Action FFPM and canceling job submis

DigiPath 4.1 Subtopic CQ# Description and Recommended Action Adding the Nuvera printer When adding the Nuvera printer, select the corresponding n

Foreign Interface (FDI) Hints & Tips Subtopic CQ# Description and Recommended Action Accumulator device timed out 24082 After a Jam, the opera

Appendix A: Optimize BFM performance You can improve your experience with your Nuvera system by customizing the BFM’s behavior to meet your needs

Control the stacking limit The BFM is designed to stack up to the equivalent of 3000 sheets of 20 lb paper. The BFM detects when it’s getting close

weight, paper type, whether 1-sided or 2-sided output). If the default automatic setting is not providing flat enough output, it is possible to adju

Accounting ... 31 Foreign I

turned off by selecting Improve Initial Pages Registration within Set in the Stacker Limits dialog. Note: With 7.0 SW, the “Improve Set Registration

4 Sheet flatness adjustment (in Printer: Adjust Decurler…) If the Sheet Enhancement Module is present • Flat paper gives best performance in BFM.

BFM Front door and covers operations: The 5 areas on the Purge BFM include: 1. The top left cover (swings up to left for jam clearance). Area 1 is

- The LED will change state from on to off for the duration of the button press. - When the set is complete, the machine will cycle down, lower the

0

Introduction This Hints & Tips document is a guide to the known operating limitations of the Xerox Nuvera EA Digital Production System. The infor

New Capabilities for the 8.0 release The Following features are new to the 8.0 Xerox Nuvera EA Digital Production System: • The new EA toner is ena

Issues resolved with this release The Xerox Nuvera EA Digital Production Systems replace the previous Copier / Printer and Production System models.

Dual DS5000: Job integrity 29898 Dual DS5000 configuration: Last sheet not delivered to finisher 2 stack when finisher 2 is full and the system swi

System Hints & Tips Optimizing System Performance Subtopic Description and Recommended Actions External Finishing (DFA) If a DFA finisher is at