Xerox Documate 752 Guide de l'utilisateur télécharger pdf (Page 104)

DocuMate 752 Scanner User’s Guide 99

Scanning with the WIA Interface

The Scan using Xerox DocuMate 752 window opens.Use this

window to select scanning options and start the scan process.

3. From the Paper Source drop-down list, choose Document

Feeder to scan from the Automatic Document Feeder, or

Flatbed to scan a from the Flatbed glass.

4. If you’re scanning from the Automatic Document Feeder, select

a paper size from the Page Size list.

If you’re scanning from the Flatbed glass, you can change the

size of the scanned image after seeing a preview.

5. Click Preview to preview the image before scanning.

The image is displayed on the right side of the window.

6. Adjust settings of the previewed image as desired:

• Change the button selection for the type of image.

• Adjust the custom settings; refer to the next section, “Fine

Tuning Your Scans”.

• If you’re scanning from the Flatbed, change the size of the

scanned image. To do this, click and hold the mouse

pointer over one of the four sizing-boxes on the corners of

the previewed image. Then drag the box to increase or

decrease the size of the image.

7. Preview the image again. When you are satisfied with the

image, click the Scan button.

NOTE: If you preview when scanning a stack of documents, the

first page of the stack feeds through the ADF for the preview.

After adjusting the scanner settings, replace that page on the

stack so it is scanned with the rest of the pages.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 133 134

Pas de commentaire

Xerox Documate 752 Guide de l'utilisateur Page 104