Xerox Printer FS 3270 Manuel d'utilisateur télécharger pdf (Page 20)

Specifying Timeout

Xerox FS 3270, User's Guide

- 20 -

4. Specifying Timeout

In order to specify the timeout for a specific input port, an FSL ( Function

Selection via the Line) sequence must be sent to the port in question. To

do this a temporary Escape (ESC) Character must be defined first. This is

done in the following way:

&&??<character>

The sequence "&&??%" will define "%" as the ESC Character.

Timeout is specified in FSL Function 100 . This function has the following

syntax ("%" is the ESC Character):

%Y100,<timeout>[,user string]%

Factory default = 20 seconds

Timeout: 0 to 255 indicating number of seconds

User string: Optional - string in HEX to be sent to the printer before

transmission of data, when the printer is selected by the

share unit.

If function 100 is sent to the coax, a user string number

can be defined instead of a HEX string. The user string

then has to be defined in function 61.

NOTE:

The Timeout string must be written in ONE line (see example

overleaf).

The user string and settings will only be sent if a share condition has

occurred.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 61 62

Pas de commentaire

Xerox Printer FS 3270 Manuel d'utilisateur Page 20