Xerox Phaser 4622 Guide de l'utilisateur télécharger pdf (Page 138)

Software Upgrade

Phaser 4622

System Administrator Guide

132

Procedure

1. At your Workstation, open the web browser, enter the IP Address of the machine in the Address

bar.

2. Press Enter.

3. Click on the Properties tab.

4. Click on Maintenance link.

5. Click on Firmware Upgrade link.

6. Click on Enabled.

7. Click on Firmware Upgrade. If prompted, enter the Administrator’s User ID admin and Password

1111, and click Login.

8. In the Firmware Upgrade box, click on Browse to locate the software upgrade file .hd obtained

earlier.

9. Click on the .hd file.

10. Click on the Open button.

11. Click on the Install Software button to proceed with the upgrade.

If prompted, enter the Administrator’s User ID admin and Password 1111, and click Login.

12. The file will be sent to the printer and will disable the printing functionality. The web browser will

become inactive and you will not be able to access the machine via this method until the upgrade

has completed and the machine has rebooted. The upgrade should take no longer than 30

minutes.

13. Once the machine has completed the upgrade it will reboot automatically. The configuration

report will print (if enabled). Check the configuration report to verify that the software level has

changed.

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 154 155

Pas de commentaire

Xerox Phaser 4622 Guide de l'utilisateur Page 138