Xerox Phaser 3320 Guide de l'utilisateur télécharger pdf (Page 63)

Security Settings

Xerox Phaser 3320DN/3320DNI

System Administrator Guide

2. Press Enter.

3. Select Properties.

4. If prompted, enter the Administrator User Name (admin) and Password (1111), and select Login.

5. Click Properties.

6. In the Security link on the left hand side select the System Security link.

7. Select the Feature Management link in the directory tree.

8. To enable or disable a control, check or uncheck the box in the Firmware Upgrde, Physical Ports

and Network Protocols areas.

•For LPR/LPD Protocol, enter the required port number. (The default is 515).

•For Raw TCP/IP Printing Protocol, enter the required port number (The default is 9100).

9. Click Apply to save the changes.

Restart Device

The Restart Device screen allows you to reboot the machine remotely from your desktop.

Note When the machine is restarted, the Network Controller will take some time to restart.

The network connectivity will be unavailable during this time.

1. At your workstation, open the web browser and enter the IP Address of the machine in the

Address Bar.

2. Press Enter.

3. Select Properties.

4. If prompted, enter the Administrator User Name (admin) and Password (1111), and select Login.

5. Click Properties.

6. In the Security link on the left hand side select the System Security link.

7. Select the Restart Device link in the directory tree.

8. To reboot the machine select the required Restart Now button

9. The Do you really want to restart the device screen appears. Click Yes. The machine will reboot.

Internet Services may be unavailable for several minutes while the machine reboots.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 111 112

Pas de commentaire

Xerox Phaser 3320 Guide de l'utilisateur Page 63