Xerox Documate 632 Manuel d'utilisateur télécharger pdf (Page 11)

Installation

6 DocuMate 632 Scanner User’s Guide

5. Swing the input tray up until it snaps into place.

6. Plug the ADF cable into the ADF port on the back of the

scanner. Make sure the cable is plugged in securely. The ADF

will not work if the cable is loose or not plugged in.

7. Push the locking tab down to the unlocked position.

8. When you’re finished assembling the scanner, place it on a

level surface on your desk. If the scanner is on an uneven

surface, it may stall when scanning from the Flatbed.

9. Proceed to “Step 2: Install the Software.”

NOTE: The locking tab protects the scanner’s scan head by

holding it securely in position. Lock the scanner when

transporting it from one location to another, but remember to

unlock it before scanning. The scanner will not scan when

locked.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 132 133

Pas de commentaire

Xerox Documate 632 Manuel d'utilisateur Page 11