Xerox Documate 632 Manuel d'utilisateur télécharger pdf (Page 29)

Scanning

24 DocuMate 632 Scanner User’s Guide

Check the Scan Settings Before Scanning

1. To check the scan settings before scanning, click on the One

Touch icon in the Windows Notification Area (at the bottom right

corner of the screen).

The One Touch Button Panel opens. Click on the arrows to

cycle through to the other buttons.

2. Right-click a button on the panel to see its description.

The One Touch Button Panel shows the description of the

selected setting. This sample shows the current description of

setting 6.

The One Touch Properties window for that setting also opens

so you can change any settings before scanning.

3. When you are ready to scan, click the button on the One Touch

Button Panel. See “Scan from the One Touch Button Panel” on

page 26 for more about the Button Panel.

The One Touch Icon

This number corresponds

to the LED on the scanner.

The icon indicates the

Destination Application

for this setting.

The current name of the

setting.

Your document will be scanned with

these options for setting Number 6.

Note: The configurations shown

on this example of the One

Touch Properties window are for

illustration purposes only. The

configurations you see on your

One Touch Properties window

may be different.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 132 133

Pas de commentaire

Xerox Documate 632 Manuel d'utilisateur Page 29