Xerox Phaser 3330 Manuel d'utilisateur télécharger pdf (Page 74)

• Adjust the paper guides in all trays after inserting the paper. A guide that is not

properly adjusted can cause poor print quality, misfeeds, skewed prints, and printer

damage.

• After loading the trays, select the correct paper type and size on the control panel.

• When printing, select the correct type and size in the print driver.

• Store paper in a dry location.

• Use only Xerox paper and transparencies designed for the printer.

Avoid the following:

• Polyester coated paper that is specially designed for inkjet printers.

• Paper that is folded, wrinkled, or excessively curled.

• Loading more than one type, size, or weight of paper in a tray at the same time.

• Overfilling the trays.

• Allowing the output tray to overfill.

Locating Paper Jams

Warning

To avoid injury, never touch a labeled area on or near the heat roller in the fuser. If a

sheet of paper is wrapped around the heat roller, do not try to remove it immediately.

Switch off the printer immediately and wait 30 minutes for the fuser to cool. After the

printer cools, try to remove the jammed paper. If the error persists, contact your Xerox

representative.

The following illustration shows where paper jams can occur along the paper path:

Xerox

Phaser

3330 Printer7-6

User Guide

Troubleshooting

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 113 114

Pas de commentaire

Xerox Phaser 3330 Manuel d'utilisateur Page 74