Xerox FreeFlow® Print Server Version 6.0 (Security Guide Manuel d'utilisateur télécharger pdf (Page 30)

26 Security Guide

NOTE: During steps 2-5, the user may go back and correct any

mistakes made in previous steps.

– Click on the 'Enable SSL/TLS' checkbox at the top of the SSL/

TLS window.

– Select a SSL/TLS mode of operation:

• Normal (Encrypted and Unencrypted Access)

• Secure (Encrypted Access Only)

– Select encryption strength:

• Normal (DES-MD5-56-bit)

• Normal (DES-MD5-40-bit)

• Normal (DES-MD5-128-bit)

• Normal (3DES-MD5-128bit)

• High (RC4-MD5-128-bit)

• High (3DES-MD5-128-bit)

Using an Existing Signed Certificate from a Certificate Authority

– If SSL/TLS is not already enabled

– Click 'Add Certificate'

Step 1 - Select "Signed Certificate from a Certificate Authority"

Step 2 - Select and enter either the server

• Domain Name

• IP Address

•Other

Step 3 - Enter the requested information:

• Organization (required)

• Organizational Unit (optional)

• E-mail (optional)

• Locality (optional)

• State/Province (optional)

• Country (required)

Step 4 - Browse to the location of the signed certificate (.pem

file).

Step 5 - Verify information entered in previous steps.

Step 6 - A message will appear indicating that the certificate

has been installed.

NOTE: During steps 2-5, the user may go back and correct any

mistakes made in previous steps.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36 37 38

Pas de commentaire

Xerox FreeFlow® Print Server Version 6.0 (Security Guide Manuel d'utilisateur Page 30