Xerox Card Scanner 200 Guide de l'utilisateur télécharger pdf (Page 77)

Maintenance

72 Xerox Card Scanner 200 User’s Guide

5. Place the cleaning sheet in the scanner.

The scanner pulls in the cleaning sheet. The scanner will move the cleaning sheet back and forth during

cleaning.

6. When cleaning is complete the scanner will eject the sheet out of the scanner. Do not forcefully pull the

sheet out, the scanner will release the sheet when it has fully exited out of the scanner.

Cleaning from the Windows Control Panel:

If you did not install One Touch during the initial installation of the scanner driver, see page 8, please

follow these steps to open the scanner’s hardware properties.

NOTE: If you are using Windows 2000 or Windows Vista 64-bit, please see “Calibrating or Cleaning the

Scanner from TWAIN” on page 64. All other supported versions of Windows can use these intructions or

the ones in the TWAIN section.

1. Open the Windows Control Panel.

2. Double-click on Scanners and Cameras.

If you do not see Scanners and Cameras, open Printers and Other Hardware then you should see this

option.

3. Your Xerox Card Scanner 200 should be listed as one of the attached scanners. Right-click on the

scanner and choose Properties to open the Device Settings for your scanner.

4. You can now follow the steps in this section to clean the scanner.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 97 98

Pas de commentaire

Xerox Card Scanner 200 Guide de l'utilisateur Page 77