Xerox DocuColor 2045 Manuel d'utilisateur télécharger pdf (Page 37)

TOOLS M ODE

D OCUCOLOR 2060/2045 SYSTEM ADMINISTRATION GUIDE

TOOLS MODE

1– 15

Run Calibration

Use the Run Calibration feature if it is visually obvious that the gray balance on

your scan to print jobs is not correct. During the Run Calibration procedure, the

digital press creates a Look Up Table by reading the 12 Toner Density Patches

that print out. The digital press then compares those readings to the factory-set

target values and makes the necessary adjustments to bring the values within

the target range.

NOTE:PG is an abbreviation for Pattern Generator. The R in 200R indicates

Rotated Line screen, and the C in 200C and 150C indicates Cluster Dot screen.

1 Touch the Run Calibration button on the Auto Color Calibration screen to begin

the calibration process. The Run Calibration screen appears.

Figure 13. Run Calibration screen

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 143 144

Pas de commentaire

Xerox DocuColor 2045 Manuel d'utilisateur Page 37