Xerox DocuPrint Network Laser Printers Manuel d'utilisateur Page 82

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 124
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 81
Windows Troubleshooting
4-30 DocuPrint Technical Information Guide
Windows NT 4.0
Troubleshooting
(AppleTalk)
This troubleshooting section assumes:
You have verified the operation of the printer using the
procedures found in Chapter 2: Connecting to Your
Network.
You have loaded a DocuPrint PCL or PostScript print
driver.
You have printed and retained a current copy of the
Configuration Sheet.
1
Verify this item in the upper left corner of the
Configuration Sheet:
EtherTalk Name is correct.
2
Verify these items in the EtherTalk and Ethernet Menu
areas of the Configuration Sheet:
Enabled: is set to Yes.
Zone: contains the desired zone name or * (*=all zones).
3
From the server desktop, use the right mouse button and
select Network Neighborhood then with the left mouse
button select Properties from the cascade menu.
4
The Network dialog will appear. Select the configuration
tab.
5
Check the list of installed network components for the
following item:
AppleTalk Protocol
6
If you have elected to run CentreWare DP you must also
have loaded Novell NetWare Client 32, Novell NetWare
Client, a Novell server on the network, and an IPX/SPX
Compatible protocol component. You may also discover
printers that have been assigned a TCP/IP address.
7
As required, install any components not listed and restart
the system.
8
Once rebooted, select the Start button and Settings, then
select the Printers folder. The printers window will appear.
Vue de la page 81
1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 123 124

Commentaires sur ces manuels

Pas de commentaire